 |
 |
 |
 |
|
 |
|
Features
- PLEASE NOTE: Price is per / FT
 Product Specifications
PV ( Photovoltaic Wire )
90C WET OR DRY LOCATION
SUNLIGHT RESISTANT
XLPE ( UL )
UL LISTED
MADE IN USA
Insulation thickness- 0.060
Nominal Outside Diameter- 0.236
Color - Black
THHN/MTW/THWN-2/T90 COPPER CONDUCTOR
Photovoltaic Wire, commonly known as PV Wire, is used as a grounded interconnection wire and for underground photovoltaic power systems. This product is sunlight and UV resistant and commonly used in solar applications. ROHS compliant.
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC).
Type THHN/THWN-2 is permitted for new construction or rewiring for 600-volt applications.
Engineering Specifications
Standards
Underwriters Laboratories Standards UL-83, UL-1063, UL-758
AWM Spec 1316, 1317, 1318, 1319, 1320, 1321
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
Canadian Standards Association C22.2 No. 75
NEMA WC70/ICEA S-95-658
UL 1685-FT4/IEEE 1202 (70,000 Btu/hr) Flame Test (1/0 AWG and larger)
ICEA T-29-520 (210,000 Btu/hr) Flame Test
ARRA 2009; Section 1605 "Buy American" Compliant
Construction
Conductors
Solid, uncoated copper conductors per ASTM-B3
Stranded, uncoated copper conductors per ASTM-B3, ASTM-B787 and ASTM-B8
Insulation
Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame-retardant compound per UL-1063 and UL-83
Applications
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code(NEC). Type THHN/THWN-2 is permitted for new construction or rewiring for 600-volt applications.For applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90C or not to exceed 75°C in oil or coolants. For applications requiring Type MTW, the conductor is appropriate for use in dry locations
at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM (18 AWG - 1 AWG) conductor is appropriate for use at temperatures not exceeding 105°C in dry locations.
|
|
|
|
|
|
|
