 |
 |
 |
 |
|
 |
|
Features
- WITH MC4 CONNECTORS ( 10 AWG ) - 50FT
This may be used to extend one wire 50 feet to another MC connection, or cut in half to extend both positive and negative wires 25 feet to normal wire connections.
PV
90C WET OR DRY LOCATION
SUNLIGHT RESISTANT
XLPE ( UL )
UL LISTED
MADE IN USA
Insulation thickness- 0.060
Nominal Outside Diameter- 0.236
Color - Black
THHN/MTW/THWN-2/T90 COPPER CONDUCTOR
Photovoltaic Wire, commonly known as PV Wire, is used as a grounded interconnection wire and for underground photovoltaic power systems. This product is sunlight and UV resistant and commonly used in solar applications. ROHS compliant.
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC).
Type THHN/THWN-2 is permitted for new construction or rewiring for 600-volt applications.
Engineering Specifications
Standards
Underwriters Laboratories Standards UL-83, UL-1063, UL-758
AWM Spec 1316, 1317, 1318, 1319, 1320, 1321
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
Canadian Standards Association C22.2 No. 75
NEMA WC70/ICEA S-95-658
UL 1685-FT4/IEEE 1202 (70,000 Btu/hr) Flame Test (1/0 AWG and larger)
ICEA T-29-520 (210,000 Btu/hr) Flame Test
ARRA 2009; Section 1605 "Buy American" Compliant
Construction
Conductors
Solid, uncoated copper conductors per ASTM-B3
Stranded, uncoated copper conductors per ASTM-B3, ASTM-B787 and ASTM-B8
Insulation
Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame-retardant compound per UL-1063 and UL-83
Applications
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code(NEC). Type THHN/THWN-2 is permitted for new construction or rewiring for 600-volt applications.For applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90C or not to exceed 75°C in oil or coolants. For applications requiring Type MTW, the conductor is appropriate for use in dry locations
at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM (18 AWG - 1 AWG) conductor is appropriate for use at temperatures not exceeding 105°C in dry locations.
|
|
|
|
|
|
|
