Unlimited Solar offers a complete line of Photovoltaic (PV) products per UL-4703. PV wire is sunlight-resistant and carries a VW-1 flame rating, PV products comply with standards such as IEEE
1202/UL 1685-FT4 Flame Test, NEMC WC70/ICEA S-95-658, UL-854 and UL-4703. While this product is suitable for outdoor rooftop applications without conduit, it is also suitable for use in conduits and raceways installed underground and in conduit in wet conditions where condensation and moisture accumulations within the conduit do not exceed 90°C. Our PV products are RoHS compliant and are great for wind energy applications such as power distribution in wind turbines, transformers and generators.All Cables are made using Original Multi-Contact MC4 Connectors ( UL Approved ).
This may be used to extend one wire 5' (ft) to another MC4 connection, or cut in half to extend both positive and negative wires 2.5' (ft) to normal wire connections.
Size: 12 AWG
Number of Strands: 19
Insulation Thickness XLPE: 0.075 (in)
Outside Diameter: 0.238 (in)
Underwriters Laboratories Standards UL-4703, UL-854
UL 1685-FT4/IEEE 1202 (70,000 Btu/hr) Flame Test (1/0 AWG and larger)
ICEA T-29-520 (210,000 Btu/hr) Flame Test
NEMA WC70/ICEA S-95-658
NFPA 70: National Electrical Code (NEC)
ARRA 2009; Section 1605 "Buy American" Compliant
SOLAR PV WIRE ( UL 4703 )
Solar PV wire is one such cable. It is ozone, UV, and moisture resistant cable used for interconnection wiring in photovoltaic systems. It is a durable cable rated at 90°C wet and up to 150°C in dry applications. It can be rated to 600, 1000, or 2000 volts. PV Wire can be used as underground service entrance wire, and is appropriate for both grounded and ungrounded PV arrays. PV Wire meets UL Standard 4703.
RoHS compliance means that the cable is free of hazardous substances, making it even greener! Choosing solar power cables designed with non-hazardous materials puts an environmentally friendly cable in an environmentally friendly application, and it doesn’t get much better than that!