Victron BlueSolar PWM-Pro 10 Amp 12/24 Volt Solar Charge Controller

(No reviews yet) Write a Review
Usually Ships in 24 to 48 hours
2.00 LBS
Free Shipping

Victron BlueSolar PWM-Pro 10 Amp 12/24 Volt Solar Charge Controller

Model Number : U-SCC010010010

BlueSolar PWM-PRO 


The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.
Lighting control function, fully programmable. 
Three stage battery charging (bulk, absorption, float), fully programmable.
Integrated battery monitor function (Remote Panel needed to display state of charge).
Load output with low voltage disconnect and manual control (default setting).
Optional external temperature sensor. 

Technical specifications

Model  U-SCC010001000
Battery Voltage  12/24 V with automatic system voltage detection
Rated charge current 10A
Automatic load disconnect Yes
Maximum solar voltage  28V / 55V (1)
Self-consumption < 10 mA
Load output  Manual control + low voltage disconnect
Protection Battery reverse polarity (fuse) : Output short circuit : Over temperature
Overload protection Shut down after 60 s in case of 130% load
Grounding Common positive
Operating temp. range -20 to +50°C (full load)
Humidity (non-condensing)  Max 95%
Charge voltage 'absorption'  14.2V / 28,4V
Charge voltage 'float' 13.8V / 27,6V
Low voltage load disconnect 11,2V / 22,4V
Low voltage load reconnect 12,6V / 25,2V (manual) ; 13,1V / 26,2V (automatic)
Protection class IP20
Terminal size  mm² / AWG10
Weight  0,15kg
Dimensions (h x w x d)  70 x 133 x 33,5 mm (2.8 x 5.3 x 1.3 inch)
Safety IEC 62109-1
EMC  EN 61000-6-1, EN 61000-6-3, ISO 7637-2