Additional Information

Additional Information
  • Home

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
  • Call us on 877-855-4885
  • My Account
  • Gift Certificates
Unlimited Solar, inc

Victron SmartSolar 30 Amp MPPT 100/30 Solar Charge Controller with Smart Control


Victron SmartSolar 30 Amp MPPT 100/30 Solar Charge Controller with Smart Control

3.00 LBS
Usually Ships in 24 to 48 hours
Free Shipping

Product Description

Victron SmartSolar 20 Amp MPPT 100/20 Solar Charge Controller with Smart Control

Model Number : U-SCC110030210

SmartSolar Charge Controllers with load output

Bluetooth Smart built-in

dongle not needed The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.


For a wired data connection to a Color Control panel, PC or other devices

Ultra-fast Maximum Power Point Tracking (MPPT) 

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output 

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof

Battery Life: intelligent battery management 

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm

See the software section on our website for details

Day/night timing and light dimming option

See the software section on our website for details

Programming, real-time data and history display options

- Modern Apple and Android smartphones, tablets, macbooks and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots.

- ColorControl panel

Technical specifications

SmartSolar Charge Controller MPPT 100/30
Battery voltage  12/24V Auto Select
Rated charge current 30A
Nominal PV power, 12V 1a,b) 440W
Nominal PV power, 24V 1a,b)  880W
Max. PV short circuit current 2) 35A
Automatic load disconnect Yes, maximum load 15A
Maximum PV open circuit voltage 100V
Peak efficiency 98%
Peak efficiency 12V: 30 mA 24V: 20 mA
Self-consumption 14,4V / 28,8V (adjustable)
Charge voltage 'absorption'   13,8V / 27,6V (adjustable)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. -32 mV / °C
Continuous/peak load current 15A / 50A
Low voltage load disconnect 11,1V / 22,2V or 11,8V / 23,6V or Battery Life algorithm
Low voltage load reconnect 13,1V / 26,2V or 14V / 28V or Battery Life algorithm
Protection Battery reverse polarity (fuse) Output short circuit / Over temperature
Operating temperature  -30 to +60°C (full rated output up to 40°C)
Humidity  95%, non-condensing
Data communication port  VE.Direct See the data communication white paper on our website
Colour Blue (RAL 5012)
Power terminals  6 mm² / AWG10
Protection category  IP43 (electronic components), IP22 (connection area)
Weight  0,5 kg
Dimensions (h x w x d)  100 x 113 x 40 mm
Safety  EN/IEC 62109-1, UL 1741, CSA C22.2

Product Reviews